This product is no longer in production.
The HT7 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller. It has solids handling capability to 3/4" and is designed to handle liquids to 200° F (93° C).
1-year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2 HP
MAXIMUM HEAD: 50 FT (15.2 M)
MAXIMUM CAPACITY: 100 GPM (378 LPM)
FLOW AT 10' LIFT: 95 GPM (Drops to 65 GPM as Water Temp Approaches Pump's Limits)
SWITCH: Tethered float, On: 17.8" / Off:8.8"
MOTOR: 1/2 HP, 3450 RPM, PSC with thermal overload
IMPELLER: Cast Iron
SHAFT SEAL: Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
BEARINGS: Ball type, Oil lubricated
EXTERIOR HARDWARE: Stainless Steel
MAXIMUM SOLIDS HANDLING SIZE: 3/4" (19mm)
AMP DRAW: 12 amps at max draw
POWER CORD: 20' UL Listed, oil and water resistant 16-4 SOOW-A/SOOW with stainless steel cord connector
VOLTAGE: 115 volts AC, 60 Hz
MAXIMUM LIQUID TEMPERAQTURE: 200°F (93°C)