This product is no longer in production.
The EC3 Series pump is a small, rugged, submersible cast iron pump with a non-clog vortex impeller and solids handling capability to 3/4".
1-year limited warranty
BODY CONSTRUCTION: cast Iron
HORSEPOWER: 1/3 HP
MAXIMUM HEAD: 21'
MAXIMUM CAPACITY: 51 GPM
FLOW AT 10' LIFT: 46 GPM
SWITCH: No switch, or with Tethered Float
SWITCH 'ON' LEVEL: 13-1/2"
SWITCH 'OFF' LEVEL: 4-1/2"
MOTOR: 1/3 HP Shaded pole with thermal overload
IMPELLER: Fiberglass reinforced Noryl® with threaded insert
SHAFT SEAL: Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts
BEARINGS: Upper sleeve and lower ball bearings, oil lubricated
EXTERIOR HARDWARE: Stainless steel
DISCHARGE SIZE: 1-1/2" NPT
MAXIMUM SOLIDS HANDLING SIZE: 3/4" spherical
AMP DRAW: 230v: 7 amps / 115v: 13 amps (at full flow)
POWER CORD: 20' water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug
VOLTAGE: 115 Volts or 230 Volts, 60 Hz
MAXIMUM LIQUID TEMP: 130°F (55°C)
: . . . . Noryl® is a registered trademark of SABIC Innovative Plastics IP BV