This product is no longer in production.
Our best, the SCC9 Series pump is a rugged, cast iron, submersible pump with a non-clog, two-vane semi-open impeller and solids handling capability to 2".
1-year limited warranty
BODY CONSTRUCTION: Cast iron
HORSEPOWER: Available in 1HP, 1-1/2HP, or 2 HP
MAXIMUM HEAD: 29' to 53' (model dependent)
MAXIMUM CAPACITY: 200 to 236 GPM (model dependent)
FLOW AT 10' LIFT: 160 to 234 GPM (model dependent)
MOTOR: 1725 RPM, PSC with thermal overload
SWITCH TYPE: Available in Manual (no switch) or Tethered float
DISCHARGE SIZE: 3" NPT
MAXIMUM SOLIDS HANDLING SIZE: 2" spherical capability
IMPELLER: Cast iron
SHAFT SEAL: Primary: Mechanical type 21 or equal, Buna-N elastomers, silicon carbide seal faces, stainless steel metal parts; Secondary: self-lubricating energized nitrile lip seal
BEARINGS: Ball type, oil lubricated
EXTERIOR HARDWARE: Stainless steel
AMP DRAW: 3 to 12 Amps (Model and Voltage Dependent)
POWER CORD: 20' UL/CSA Listed. 3-wire 16-3 SJTW-A/SJTW water resistant cord with integrally grounded three-prong plug.
VOLTAGE: Available in 230v, 208-230v, or 460v; 1- or 3-phase
MAXIMUM LIQUID TEMPERATURE: 130°F (55°C)