This product is no longer in production.
The EC4 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller and solids handling capability to 3/4".
1-year limited warranty
BODY CONSTRUCTION: Cast iron
HORSEPOWER: 4/10 HP
MAXIMUM HEAD: 40'
MAXIMUM CAPACITY: 60 GPM
FLOW AT 10' LIFT: 52 GPM
MOTOR: 4/10 HP (3450 RPM); PSC with thermal overload
SWITCH: Available with No switch (manual operation) or with Tethered Float Switch
IMPELLER: Fiberglass reinforced Noryl® with threaded insert
SHAFT SEAL: Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts
BEARINGS: Lower ball, upper sleeve type, oil lubricated
EXTERIOR HARDWARE: Stainless steel
MINIMUM SUMP DIAMETER: 18" (457mm)
DISCHARGE SIZE: 2" (50.8mm) NPT
MAXIMUM SOLIDS HANDLING SIZE: 3/4" spherical
AMP DRAW: 115v: 9.7 amps / 230v: 4.9 amps (at full load)
POWER CORD: 20' oil and water resistant 18-3 SJTW-A/SJTW with integrally grounded 3-prong plug, single phase. UL Listed. Stainless steel cord connector.
VOLTAGE: 115 Volts or 230 Volts, 60 Hz.
MAXIMUM LIQUID TEMPERATURE: 130°F (55°C)
: . . . . Noryl® is a registered trademark of SABIC Innovative Plastics IP BV